• Interchangeable With :
  • SKF

Mounted Ball Bearings

4807 Products

What Are Mounted Ball Bearings?

A mounted ball bearing is a deep groove ball bearing insert that comes already fitted in a housing. The insert has a spherical outside diameter, so it can self-align in the housing and absorb about ±2° of static misalignment between the shaft and the mounting surface. It ships sealed and pre-lubricated, and the housing bolts straight to the machine frame. You don't have to machine a bore, press a bearing or design a seal. Mounted ball bearings are used on conveyors, fans and blowers, agricultural equipment, packaging lines, food processing equipment and general machinery wherever a rotating shaft needs support.

Housing Styles

  • 2-Bolt Pillow Block – The most common style. The base is parallel to the shaft and bolts to a horizontal surface. Low-base (B) and tapped-base versions are available.
  • 4-Bolt Flange / 2-Bolt Flange / 3-Bolt Light Duty Flange – Bolts to a vertical wall, with the shaft passing through at 90°. Use a 4-bolt flange for heavier loads and a 2-bolt flange where space is tight.
  • Piloted Flange (Flange Cartridge) – A round flange with a machined pilot that centres the unit in a bored hole, for accurate shaft location.
  • Flange Bracket – A compact bracket with two mounting holes for narrow frames.
  • Take-Up Units (Wide Slot, Narrow Slot, Top Angle) – The bearing slides in a frame so you can adjust belt or chain tension on conveyors.
  • Hanger and Screw Conveyor Hanger Bearings – Hold up intermediate points of long shafts and screw conveyors.
  • Cylindrical Units – Housings with a round outside diameter that press into a bored frame.

Shaft Locking Methods

  • Set Screw (SC / SCM / VSC) – Two set screws at 65° lock the inner ring to the shaft. It is simple and economical, and it works with shafts that rotate in both directions.
  • D-Lok Clamp Collar (DL / DLM) – A concentric clamp collar is tightened with a single cap screw. It does not mark the shaft and keeps the bearing concentric with it.
  • Eccentric Collar (SXR / SXV) – The collar is turned a quarter turn in the direction of rotation and then secured with a set screw. A good choice for applications that run in one direction.
  • Grip Tight Adapter (GT / GTM) – A thin-wall adapter grips the shaft through 360°. It suits high speeds, tolerates commercial shafting and has a built-in dismount feature.

Duty Ratings in This Category

  • Standard Duty – Normal-duty (SC, DL, SXR, GT) and medium-duty (SCM, DLM, GTM) inserts for general industrial use. This group also includes Extreme Duty (ED) and air handling (AH) variants.
  • Washdown Duty – Corrosion-resistant E-Z Kleen (EZ) units with polymer or stainless steel housings for food, beverage and other wet or washdown environments.

How to Choose

  1. Measure the shaft diameter (inch or metric).
  2. Choose the housing style that fits your mounting surface.
  3. Choose the locking method for your speed, direction of rotation and shaft condition.
  4. Choose the duty: standard for dry industrial areas, washdown for wet areas and areas with chemical cleaning.
  5. Check the load rating and speed rating on the product page.
loading..