Cancel
Single Row Angular Contact Ball Bearings Permissible speed
Permissible speed
For bearings arranged in pairs, the limiting speed should be reduced to approximately 80% of the value quoted for a single bearing.
The speed ratings in the (product table) indicate:
- the reference speed, which enables a quick assessment of the speed capabilities from a thermal frame of reference
- the limiting speed, which is a mechanical limit that should not be exceeded unless the bearing design and the application are adapted for higher speeds
For additional information, refer to Operating temperature and speed.
Bearing pairs
For bearings arranged in pairs, the limiting speed remains unchanged but the reference speed should be reduced to approximately 80% of the value quoted for a single bearing.