YRT50

d 50 mm Tolerance: 0/-0,008
D 126 mm Tolerance: 0/-0,011
H 30 mm
10 Number of fixing holes in inner ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes.
12 Number of fixing holes in outer ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes.
2 Number of retaining screws
C 10 mm
D1 max 105 mm Diameter of inner ring for design of adjacent construction
d1 5,6 mm Fixing holes in inner ring
d3 5,6 mm Fixing holes in outer ring
H1 20 mm
H2 10 mm
J 63 mm Fixing holes in inner ring
J1 116 mm Fixing holes in outer ring
t 12 x 30° Pitch t Including retaining screws and extraction threads Quantity X t
m 1,6 kg ≈ Mass
MA 8,5 Nm Screw tightening torque Tightening torque for screws to DIN EN ISO 4762, grade 10.9
Ca 56000 N Basic dynamic load rating, axial
C0a 280000 N Basic static load rating, axial
Cr 28500 N Basic dynamic load rating, radial
C0r 49500 N Basic static load rating, radial
Cur 7100 N Fatigue limit load, radial
Cua 29500 N Fatigue limit load, axial
nG 440 1/min Limiting speed For high operating durations or continuous operation, please contact us.
MR 2,5 Nm Bearing frictional torque Measurement speed n const = 5 1/min, bearing temperature +50°C, after grease distribution cycle; frictional torque may increase by 2,5 times up to the limiting speed.
caL 1300 N/µm Axial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
crL 1100 N/µm Radial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
ckL 1250 Nm/mrad Tilting rigidity of the bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
caL 6200 N/µm Axial rigidity of rolling element set
crL 1500 N/µm Radial rigidity of rolling element set
ckL 5900 Nm/mrad Tilting rigidity of rolling element set

Hole pattern
2 retaining screws (1)

  • Request a Quote

Recommend