How can we improve?
We manufacture Loose Stainless Steel Balls in any size from 0.5 mm to over 2" ( 50.8 mm). We manufacture Stainless Steel Bearing Ball in any stainless material from 440C to 316. We manufacture precision balls from one piece to millions of pieces. These precision stainless steel balls that are rounder, with a better surface finish, than other commercial source.
| Product Number | Diameter Tolerance | Hardness | Maximum Temperature |
|---|---|---|---|
| 1/16" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 5/64" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 3/32" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 7/64" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 1/8" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 9/64" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 5/32" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 3/16" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 7/32" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 1/4" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 9/32" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 5/16" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 11/32" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 3/8" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 7/16" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 1/2" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 9/16" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 5/8" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 11/16" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 3/4" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 13/16" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 7/8" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 15/16" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 1" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 1 1/16" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 1 1/8" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 1 3/16" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 1 1/4" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 1 3/8" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 1 1/2" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 2" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 3" | -0.0005" to 0.0005" | HRC60-65 | 800° F | 427℃ |
| 1mm | -0.0025mm to 0.0025mm | HRC60-65 | 800° F | 427℃ |
| 1.5mm | -0.0025mm to 0.0025mm | HRC60-65 | 800° F | 427℃ |
| 2mm | -0.0025mm to 0.0025mm | HRC60-65 | 800° F | 427℃ |
| 2mm | -0.0025mm to 0.0025mm | HRC60-65 | 800° F | 427℃ |
| 2.5mm | -0.0025mm to 0.0025mm | HRC60-65 | 800° F | 427℃ |
| 3mm | -0.0025mm to 0.0025mm | HRC60-65 | 800° F | 427℃ |
| 3.5mm | -0.0025mm to 0.0025mm | HRC60-65 | 800° F | 427℃ |
| 4mm | -0.0025mm to 0.0025mm | HRC60-65 | 800° F | 427℃ |
| 5mm | -0.0025mm to 0.0025mm | HRC60-65 | 800° F | 427℃ |
| 6mm | -0.0025mm to 0.0025mm | HRC60-65 | 800° F | 427℃ |
| 7mm | -0.0025mm to 0.0025mm | HRC60-65 | 800° F | 427℃ |
| 8mm | -0.0025mm to 0.0025mm | HRC60-65 | 800° F | 427℃ |
| 9mm | -0.0025mm to 0.0025mm | HRC60-65 | 800° F | 427℃ |
| 10mm | -0.0025mm to 0.0025mm | HRC60-65 | 800° F | 427℃ |
| 12mm | -0.0025mm to 0.0025mm | HRC60-65 | 800° F | 427℃ |
| 13mm | -0.0025mm to 0.0025mm | HRC60-65 | 800° F | 427℃ |
| 14mm | -0.0025mm to 0.0025mm | HRC60-65 | 800° F | 427℃ |
| 15mm | -0.0025mm to 0.0025mm | HRC60-65 | 800° F | 427℃ |
| 16mm | -0.0025mm to 0.0025mm | HRC60-65 | 800° F | 427℃ |
| 18mm | -0.0025mm to 0.0025mm | HRC60-65 | 800° F | 427℃ |
| 24mm | -0.0025mm to 0.0025mm | HRC60-65 | 800° F | 427℃ |
| Product Number | Diameter Tolerance | Hardness | Maximum Temperature |
|---|---|---|---|
| 1/16" | -0.0005" to 0.0005" | Rockwell C25 (Hard) | 800° F | 427℃ |
| 3/32" | -0.0005" to 0.0005" | Rockwell C25 (Hard) | 800° F | 427℃ |
| 1/8" | -0.0005" to 0.0005" | Rockwell C25 (Hard) | 800° F | 427℃ |
| 5/32" | -0.0005" to 0.0005" | Rockwell C25 (Hard) | 800° F | 427℃ |
| 3/16" | -0.0005" to 0.0005" | Rockwell C25 (Hard) | 800° F | 427℃ |
| 7/32" | -0.0005" to 0.0005" | Rockwell C25 (Hard) | 800° F | 427℃ |
| 1/4" | -0.0005" to 0.0005" | Rockwell C25 (Hard) | 800° F | 427℃ |
| 9/32" | -0.0005" to 0.0005" | Rockwell C25 (Hard) | 800° F | 427℃ |
| 5/16" | -0.0005" to 0.0005" | Rockwell C25 (Hard) | 800° F | 427℃ |
| 11/32" | -0.0005" to 0.0005" | Rockwell C25 (Hard) | 800° F | 427℃ |
| 3/8" | -0.0005" to 0.0005" | Rockwell C25 (Hard) | 800° F | 427℃ |
| 7/16" | -0.0005" to 0.0005" | Rockwell C25 (Hard) | 800° F | 427℃ |
| 1/2" | -0.0005" to 0.0005" | Rockwell C25 (Hard) | 800° F | 427℃ |
| 5/8" | -0.0005" to 0.0005" | Rockwell C25 (Hard) | 800° F | 427℃ |
| 3/4" | -0.0005" to 0.0005" | Rockwell C25 (Hard) | 800° F | 427℃ |
| 1" | -0.0005" to 0.0005" | Rockwell C25 (Hard) | 800° F | 427℃ |
| 1 1/4" | -0.001" to 0.001" | Rockwell C25 (Hard) | 800° F | 427℃ |
| 1 1/2" | -0.001" to 0.001" | Rockwell C25 (Hard) | 800° F | 427℃ |
| 1 3/4" | -0.001" to 0.001" | Rockwell C25 (Hard) | 800° F | 427℃ |
| 2" | -0.001" to 0.001" | Rockwell C25 (Hard) | 800° F | 427℃ |
| 2.5mm | -0.0127mm to 0.0127mm | Rockwell C25 (Hard) | 800° F | 427℃ |
| 3mm | -0.0127mm to 0.0127mm | Rockwell C25 (Hard) | 800° F | 427℃ |
| 3.5mm | -0.0127mm to 0.0127mm | Rockwell C25 (Hard) | 800° F | 427℃ |
| 4mm | -0.0127mm to 0.0127mm | Rockwell C25 (Hard) | 800° F | 427℃ |
| 5mm | -0.0127mm to 0.0127mm | Rockwell C25 (Hard) | 800° F | 427℃ |
| 6mm | -0.0127mm to 0.0127mm | Rockwell C25 (Hard) | 800° F | 427℃ |
| 7mm | -0.0127mm to 0.0127mm | Rockwell C25 (Hard) | 800° F | 427℃ |
| 8mm | -0.0127mm to 0.0127mm | Rockwell C25 (Hard) | 800° F | 427℃ |
| 10mm | -0.0127mm to 0.0127mm | Rockwell C25 (Hard) | 800° F | 427℃ |
| 12mm | -0.0127mm to 0.0127mm | Rockwell C25 (Hard) | 800° F | 427℃ |
| Product Number | Diameter Tolerance | Hardness | Maximum Temperature |
|---|---|---|---|
| 1/16" | -0.001" to 0.001" | Rockwell B90 | 800° F | 427℃ |
| 3/32" | -0.001" to 0.001" | Rockwell B90 | 800° F | 427℃ |
| 1/8" | -0.001" to 0.001" | Rockwell B90 | 800° F | 427℃ |
| 5/32" | -0.001" to 0.001" | Rockwell B90 | 800° F | 427℃ |
| 3/16" | -0.001" to 0.001" | Rockwell B90 | 800° F | 427℃ |
| 7/32" | -0.001" to 0.001" | Rockwell B90 | 800° F | 427℃ |
| 1/4" | -0.001" to 0.001" | Rockwell B90 | 800° F | 427℃ |
| 5/16" | -0.001" to 0.001" | Rockwell B90 | 800° F | 427℃ |
| 3/8" | -0.001" to 0.001" | Rockwell B90 | 800° F | 427℃ |
| 7/16" | -0.001" to 0.001" | Rockwell B90 | 800° F | 427℃ |
| 1/2" | -0.001" to 0.001" | Rockwell B90 | 800° F | 427℃ |
| 9/16" | -0.001" to 0.001" | Rockwell B90 | 800° F | 427℃ |
| 5/8" | -0.001" to 0.001" | Rockwell B90 | 800° F | 427℃ |
| 3/4" | -0.001" to 0.001" | Rockwell B90 | 800° F | 427℃ |
| 7/8" | -0.001" to 0.001" | Rockwell B90 | 800° F | 427℃ |
| 1" | -0.001" to 0.001" | Rockwell B90 | 800° F | 427℃ |
| 1 1/8" | -0.001" to 0.001" | Rockwell B90 | 800° F | 427℃ |
| 1 1/4" | -0.001" to 0.001" | Rockwell B90 | 800° F | 427℃ |
| 1 3/8" | -0.001" to 0.001" | Rockwell B90 | 800° F | 427℃ |
| 1 1/2" | -0.001" to 0.001" | Rockwell B90 | 800° F | 427℃ |
| 2" | -0.001" to 0.001" | Rockwell B90 | 800° F | 427℃ |
| 2.5mm | -0.013mm to 0.013mm | Rockwell B90 | 800° F | 427℃ |
| 3mm | -0.013mm to 0.013mm | Rockwell B90 | 800° F | 427℃ |
| 3.5mm | -0.013mm to 0.013mm | Rockwell B90 | 800° F | 427℃ |
| 4mm | -0.013mm to 0.013mm | Rockwell B90 | 800° F | 427℃ |
| 5mm | -0.013mm to 0.013mm | Rockwell B90 | 800° F | 427℃ |
| 6mm | -0.013mm to 0.013mm | Rockwell B90 | 800° F | 427℃ |
| 7mm | -0.013mm to 0.013mm | Rockwell B90 | 800° F | 427℃ |
| 8mm | -0.013mm to 0.013mm | Rockwell B90 | 800° F | 427℃ |
| 10mm | -0.013mm to 0.013mm | Rockwell B90 | 800° F | 427℃ |
| 12mm | -0.013mm to 0.013mm | Rockwell B90 | 800° F | 427℃ |
AISI type 440C stainless steel balls offer the maximum in material strength and fair corrosion resistanc. They resist alcohol, food environments, fresh water, many petroleum products, organic materials and steam. Type 440C balls are uses in bearings, valves, locking mechanisms, fasteners and quick-disconnect couplings.
AISI type 304 stainless steel balls are used where good corrosion resistance is important, but hardness is not. They offer good resistance to atmospheric corrosion, dyes, food environments, sterilizing solutions and many organic and inorganic materials. Type 304 balls are used in aerosol and dispenser valves, medical applications, animal feeders, trigger sprayers, finger pumps and food processing.
AISI type 316L stainless steel balls offer excellent corrosion resistance and resistance to sulphuric acid compounds. This austenitic steel includes 2-3% molybdenum. Type 316 balls are used in trigger sprayers, bearings, dispenser valves, body jewelry, lotion pumps, quick-disconnect couplings and aerospace applications. Type 316LVM balls are used in jewelry, human implant and other medical applications.
