30232
| Part Number | 30232 |
Brand: LILY  | |
Equivalent: Timken |
| System of Measurement | Metric |
| Type | Bearing |
| Cone Part Number | X30232M |
| Cup Part Number | Y30232M |
| Bearing Type | Roller |
| Roller Bearing Type | Tapered Roller |
| For Load Direction | Combined |
| Construction | Single Row |
| Seal Type | Open |
| Cups Type | Standard |
| Series | 30232 |
| Bore Dia | 160 mm |
| Bore Dia Tolerance | -0.025mm to 0 |
| Outer Dia | 290 mm |
| Outer Dia Tolerance | -0.035mm to 0 |
| Cone Width | 48 mm |
| Cone Width Tolerance | -0.2mm to 0 |
| Cup Width | 40 mm |
| Cup Width Tolerance | -0.25mm to 0 |
| Width | 52 mm |
| Width Tolerance | +0.35mm to -0.25mm |
| Cone Backface ToClear Radius | 4 mm |
| Cup Backface ToClear Radius | 3 mm |
| Cone Frontface Backing Diameter | 178 mm |
| Cone Backface Backing Diameter | 185 mm |
| Cup Frontface Backing Diameter | 269 mm |
| Cup Backface Backing Diameter | 266 mm |
| Cage Cone Frontface Clearance | 6.1 mm |
| Cage Cone Backface Clearance | 5.3 mm |
| Effective Center Location | 5.1 mm |
| Ring Material | Chrome Steel |
| Roller Material | Chrome Steel |
| Cage Material | Steel |
| Dynamic Radial Load | 147825 lbf |
| Static Radial Load | 195300 lbf |
| Dynamic Radial Rating(90 Million Revolutions)(C90) | 38250 lbf |
| Dynamic Thrust Rating(90 Million Revolutions)(Ca90) | 28575 lbf |
| Lubrication | Required |
| Temperature Range | -30° to 110 °C |
| ABEC Rating | ABEC-1 |
| Radial Clearance | Standard (Available in C3/C4/C5) |
| RoHS | Compliant |
| REACH | Compliant |
| Weight | 30.36 lb |
})
30232 TS (Single Row Tapered Roller Bearings) (Metric) consist of a tapered inner ring assembly and an outer ring. 30232 bore dia is 160 mm. Its out dia is 290 mm. 30232 roller material is Roller_Material. Its seal type is Open. The 30232 TS (Single Row Tapered Roller Bearings) (Metric) can bear both radial and axial loads with ease and provides low friction during operation even under the most severe conditions.
Typical applications include:
Gearing Systems and Transmissions, Thermal Power Coal Transporters, Port Equipment, Rubber and other Industrial applications, Machine Tool Spindles, Gear Reducer, Automotive Drive Axle, Aircraft wheels, Agricultural Wheels, Tensioning Roller, Raking Machine, Construction and Mining Equipment, Railroad Axle-box, etc.
General Selection Factors
Several factors must be considered for choosing tapered roller bearings. These factors include the roller material, design, shields and seals, cage, Annual Bearing Engineering Committee (ABEC) grade, radial clearance, and lubricant, etc.
