SMF95zz Miniature Bearing
Price $ 1.62
Part Number SMF95zz
System of Measurement Metric
Bearing Type Ball
For Load Direction Radial
Construction Single Row
Seal Type Shielded
Bore Dia 5 mm
Bore Dia Tolerance -0.008mm to 0
Outer Dia 9 mm
Outer Dia Tolerance -0.008mm to 0
Width 3 mm
Width Tolerance -0.12mm to 0
Flange Outer Dia 10.2 mm
Flange Thickness 0.6 mm
Ring Material 440C Stainless Steel
Ball Material 440C Stainless Steel
Cage Material 300 Series Stainless Steel
Shield Material 300 Series Stainless Steel
Dynamic Radial Load 329 N
Static Radial Load 122 N
Max Speed (X1000 rpm) 45
Lubrication Required
Shaft Mount Type Press Fit
Temperature Range -30° to 110 °C
ABEC Rating ABEC1 (Available in ABEC3/5/7)
Radial Clearance Trade No. MC3 (Available in MC1/2/4/5/6)
Radial Clearance 0.002mm to 0.013mm
RoHS Compliant
REACH Compliant
Ball Dia 1.2000 mm
Ball Qty 8
Weight 0.66 g
More Technical Information
SMF95zz Miniature Bearing cad drawing

Request a Quote

The LILY bearing part series SMF95zz is a potential replacement for these common bearing part numbers.

SMF95zz miniature ball bearing has deep groove geometry for high speeds and supporting both radial and axial loads. SMF95zz bore dia is 5 mm. Its out dia is 9 mm. SMF95zz ball material is 440C Stainless Steel. Its seal type is Shielded. This SMF95zz miniature bearing is for use in applications that involve combined radial and axial loads and a need for high running accuracy at high rotational speeds. 

Typical applications include:

Motors, Flow Meters, Medical Instruments, Vacuum Pumps, Robotics Industry, Crossbow, Food & Beverage Industry, Automation & Industry, Anemometer, ATMs & Card Readers, Galvanometers, Gas Meters, Industrial Encoders, Industrial Meters, Optical Encoders, Plastic Card Printers, Surveillance Systems, Fuel controls, Gyros, synchros and servos, Cryogenic coolers, Pulmonary assist devices, Clocks, Instrumentation, Drones and model, Fishing reel, etc.

General Selection Factors

Several factors must be cons1043ered for choosing miniature ball bearings. These factors include the ring material, design, shields and seals, cage, Annual Bearing Engineering Committee (ABEC) grade, radial play, and lubricant. Miniature bearings are available in open, sealed and shielded configurations. Seals and shields are used in miniature bearings (specifically ball bearings) to retain lubricants and prevent particulate contamination from reaching critical surfaces. Seals are used where minimal light contact is offered. Seals for miniature bearings prov1043e deterrence to particulate contamination, but increase torque and limit operating speeds. Shields are used in most applications.