EE620100-620220 TS (Tapered Single Roller Bearings) (Imperial)
Part Number EE620100-620220
Brand: LILY Brand: LILY
Equivalent: Timken
System of Measurement Inch
Type Bearing
Cone Part Number EE620100
Cup Part Number 620220
Bearing Type Roller
Roller Bearing Type Tapered Roller
For Load Direction Combined
Construction Single Row
Seal Type Open
Cups Type Standard
Series 620000
Bore Dia 10"
Bore Dia Tolerance +0.001" to 0
Outer Dia 22"
Outer Dia Tolerance +0.002" to 0
Cone Width 4.125"
Cone Width Tolerance +0.003" to -0.01
Cup Width 2.75"
Cup Width Tolerance +0.002" to -0.01
Width 4.875"
Width Tolerance +0.014" to -0.01"
Cone Backface ToClear Radius 0.310"
Cup Backface ToClear Radius 0.310"
Cone Frontface Backing Diameter 13.23"
Cone Backface Backing Diameter 12.48"
Cup Frontface Backing Diameter 19.78"
Cup Backface Backing Diameter 18.78"
Cage Cone Frontface Clearance 0.72"
Cage Cone Backface Clearance 0.95"
Effective Center Location 1.92"
Ring Material Chrome Steel
Roller Material Chrome Steel
Cage Material Pin-Type
Dynamic Radial Load 404000 lbf
Static Radial Load 603000 lbf
Dynamic Radial Rating(90 Million Revolutions)(C90) 105000 lbf
Dynamic Thrust Rating(90 Million Revolutions)(Ca90) 155000 lbf
Lubrication Required
Temperature Range -30° to 110 °C
ABEC Rating ABEC-1
Radial Clearance Standard (Available in C3/C4/C5)
RoHS Compliant
REACH Compliant
Weight 279.70 lb

EE620100-620220 TS (Single Row Tapered Roller Bearings) (Imperial) consist of a tapered inner ring assembly and an outer ring. EE620100-620220 bore dia is 10". Its out dia is 22". EE620100-620220 roller material is Chrome Steel. Its seal type is Open. The EE620100-620220 TS (Single Row Tapered Roller Bearings) (Imperial) can bear both radial and axial loads with ease and provides low friction during operation even under the most severe conditions.

Typical applications include:

Gearing Systems and Transmissions, Thermal Power Coal Transporters, Port Equipment, Rubber and other Industrial applications, Machine Tool Spindles, Gear Reducer, Automotive Drive Axle, Aircraft wheels, Agricultural Wheels, Tensioning Roller, Raking Machine, Single Row and Mining Equipment, Railroad Axle-box, etc.

General Selection Factors

Several factors must be considered for choosing tapered roller bearings. These factors include the roller material, design, shields and seals, cage, Annual Bearing Engineering Committee (ABEC) grade, radial clearance, and lubricant, etc.