EE134102-134143

EE134102-134143 TS (Tapered Single Roller Bearings) (Imperial)
Part Number EE134102-134143
Brand: LILY Brand: LILY
|
Equivalent: Timken
System of Measurement Inch
Type Bearing
Cone Part Number EE134102
Cup Part Number 134143
Bearing Type Roller
Roller Bearing Type Tapered Roller
For Load Direction Combined
Construction Single Row
Seal Type Open
Cups Type Standard
Series 134000
Bore Dia 10.25"
Bore Dia Tolerance +0.001" to 0
Outer Dia 14.375"
Outer Dia Tolerance +0.002" to 0
Cone Width 2.3125"
Cone Width Tolerance +0.003" to -0.01
Cup Width 1.6875"
Cup Width Tolerance +0.002" to -0.01
Width 2.3125"
Width Tolerance +0.014" to -0.01"
Cone Backface ToClear Radius 0.25"
Cup Backface ToClear Radius 0.250"
Cone Frontface Backing Diameter 11.97"
Cone Backface Backing Diameter 11.26"
Cup Frontface Backing Diameter 13.93"
Cup Backface Backing Diameter 13.35"
Cage Cone Frontface Clearance 0.12"
Cage Cone Backface Clearance 0.3"
Effective Center Location 0.2"
Ring Material Chrome Steel
Roller Material Chrome Steel
Cage Material Steel
Dynamic Radial Load 153000 lbf
Static Radial Load 299000 lbf
Dynamic Radial Rating(90 Million Revolutions)(C90) 39600 lbf
Dynamic Thrust Rating(90 Million Revolutions)(Ca90) 25400 lbf
Lubrication Required
Temperature Range -30° to 110 °C
ABEC Rating ABEC-1
Radial Clearance Standard (Available in C3/C4/C5)
RoHS Compliant
REACH Compliant
Weight 37.50 lb

EE134102-134143 TS (Single Row Tapered Roller Bearings) (Imperial) consist of a tapered inner ring assembly and an outer ring. EE134102-134143 bore dia is 10.25". Its out dia is 14.375". EE134102-134143 roller material is Chrome Steel. Its seal type is Open. The EE134102-134143 TS (Single Row Tapered Roller Bearings) (Imperial) can bear both radial and axial loads with ease and provides low friction during operation even under the most severe conditions.


Typical applications include:

Gearing Systems and Transmissions, Thermal Power Coal Transporters, Port Equipment, Rubber and other Industrial applications, Machine Tool Spindles, Gear Reducer, Automotive Drive Axle, Aircraft wheels, Agricultural Wheels, Tensioning Roller, Raking Machine, Single Row and Mining Equipment, Railroad Axle-box, etc.


General Selection Factors

Several factors must be considered for choosing tapered roller bearings. These factors include the roller material, design, shields and seals, cage, Annual Bearing Engineering Committee (ABEC) grade, radial clearance, and lubricant, etc.