EE114080-114160

EE114080-114160 TS (Tapered Single Roller Bearings) (Imperial)
Part Number EE114080-114160
Brand: LILY Brand: LILY
|
Equivalent: Timken
System of Measurement Inch
Type Bearing
Cone Part Number EE114080
Cup Part Number 114160
Bearing Type Roller
Roller Bearing Type Tapered Roller
For Load Direction Combined
Construction Single Row
Seal Type Open
Cups Type Standard
Series 114000
Bore Dia 8"
Bore Dia Tolerance +0.001" to 0
Outer Dia 16"
Outer Dia Tolerance +0.002" to 0
Cone Width 3.375"
Cone Width Tolerance +0.003" to -0.01
Cup Width 2.25"
Cup Width Tolerance +0.002" to -0.01
Width 3.625"
Width Tolerance +0.014" to -0.01"
Cone Backface ToClear Radius 0.25"
Cup Backface ToClear Radius 0.250"
Cone Frontface Backing Diameter 10.51"
Cone Backface Backing Diameter 9.69"
Cup Frontface Backing Diameter 14.78"
Cup Backface Backing Diameter 13.74"
Cage Cone Frontface Clearance 0.44"
Cage Cone Backface Clearance 0.74"
Effective Center Location 0.98"
Ring Material Chrome Steel
Roller Material Chrome Steel
Cage Material Pin-Type
Dynamic Radial Load 274000 lbf
Static Radial Load 328000 lbf
Dynamic Radial Rating(90 Million Revolutions)(C90) 71000 lbf
Dynamic Thrust Rating(90 Million Revolutions)(Ca90) 97000 lbf
Lubrication Required
Temperature Range -30° to 110 °C
ABEC Rating ABEC-1
Radial Clearance Standard (Available in C3/C4/C5)
RoHS Compliant
REACH Compliant
Weight 103.30 lb

EE114080-114160 TS (Single Row Tapered Roller Bearings) (Imperial) consist of a tapered inner ring assembly and an outer ring. EE114080-114160 bore dia is 8". Its out dia is 16". EE114080-114160 roller material is Chrome Steel. Its seal type is Open. The EE114080-114160 TS (Single Row Tapered Roller Bearings) (Imperial) can bear both radial and axial loads with ease and provides low friction during operation even under the most severe conditions.


Typical applications include:

Gearing Systems and Transmissions, Thermal Power Coal Transporters, Port Equipment, Rubber and other Industrial applications, Machine Tool Spindles, Gear Reducer, Automotive Drive Axle, Aircraft wheels, Agricultural Wheels, Tensioning Roller, Raking Machine, Single Row and Mining Equipment, Railroad Axle-box, etc.


General Selection Factors

Several factors must be considered for choosing tapered roller bearings. These factors include the roller material, design, shields and seals, cage, Annual Bearing Engineering Committee (ABEC) grade, radial clearance, and lubricant, etc.