32252
| Part Number | 32252 |
Brand: LILY  | |
Equivalent: Timken |
| System of Measurement | Metric |
| Type | Bearing |
| Cone Part Number | X32252 |
| Cup Part Number | Y32252 |
| Bearing Type | Roller |
| Roller Bearing Type | Tapered Roller |
| For Load Direction | Combined |
| Construction | Single Row |
| Seal Type | Open |
| Cups Type | Standard |
| Series | 32252 |
| Bore Dia | 260 mm |
| Bore Dia Tolerance | -0.035mm to 0 |
| Outer Dia | 480 mm |
| Outer Dia Tolerance | -0.045mm to 0 |
| Cone Width | 130 mm |
| Cone Width Tolerance | -0.2mm to 0 |
| Cup Width | 106 mm |
| Cup Width Tolerance | -0.3mm to 0 |
| Width | 137 mm |
| Width Tolerance | +0.35mm to -0.25mm |
| Cone Backface ToClear Radius | 6 mm |
| Cup Backface ToClear Radius | 5 mm |
| Cone Frontface Backing Diameter | 306 mm |
| Cone Backface Backing Diameter | 315 mm |
| Cup Frontface Backing Diameter | 454.5 mm |
| Cup Backface Backing Diameter | 432 mm |
| Cage Cone Frontface Clearance | 10.7 mm |
| Cage Cone Backface Clearance | 17 mm |
| Effective Center Location | -22.8 mm |
| Ring Material | Chrome Steel |
| Roller Material | Chrome Steel |
| Cage Material | Steel |
| Dynamic Radial Load | 643500 lbf |
| Static Radial Load | 931500 lbf |
| Dynamic Radial Rating(90 Million Revolutions)(C90) | 166725 lbf |
| Dynamic Thrust Rating(90 Million Revolutions)(Ca90) | 122850 lbf |
| Lubrication | Required |
| Temperature Range | -30° to 110 °C |
| ABEC Rating | ABEC-1 |
| Radial Clearance | Standard (Available in C3/C4/C5) |
| RoHS | Compliant |
| REACH | Compliant |
| Weight | 229.19 lb |
})
32252 TS (Single Row Tapered Roller Bearings) (Metric) consist of a tapered inner ring assembly and an outer ring. 32252 bore dia is 260 mm. Its out dia is 480 mm. 32252 roller material is Roller_Material. Its seal type is Open. The 32252 TS (Single Row Tapered Roller Bearings) (Metric) can bear both radial and axial loads with ease and provides low friction during operation even under the most severe conditions.
Typical applications include:
Gearing Systems and Transmissions, Thermal Power Coal Transporters, Port Equipment, Rubber and other Industrial applications, Machine Tool Spindles, Gear Reducer, Automotive Drive Axle, Aircraft wheels, Agricultural Wheels, Tensioning Roller, Raking Machine, Construction and Mining Equipment, Railroad Axle-box, etc.
General Selection Factors
Several factors must be considered for choosing tapered roller bearings. These factors include the roller material, design, shields and seals, cage, Annual Bearing Engineering Committee (ABEC) grade, radial clearance, and lubricant, etc.
