30322
Part Number | 30322 |
Brand: LILY | |
Equivalent: Timken |
System of Measurement | Metric |
Type | Bearing |
Cone Part Number | X30322M |
Cup Part Number | Y30322M |
Bearing Type | Roller |
Roller Bearing Type | Tapered Roller |
For Load Direction | Combined |
Construction | Single Row |
Seal Type | Open |
Cups Type | Standard |
Series | 30322 |
Bore Dia | 110 mm |
Bore Dia Tolerance | -0.02mm to 0 |
Outer Dia | 240 mm |
Outer Dia Tolerance | -0.03mm to 0 |
Cone Width | 50 mm |
Cone Width Tolerance | -0.15mm to 0 |
Cup Width | 42 mm |
Cup Width Tolerance | -0.25mm to 0 |
Width | 54.5 mm |
Width Tolerance | +0.2mm to -0.2mm |
Cone Backface ToClear Radius | 4 mm |
Cup Backface ToClear Radius | 3 mm |
Cone Frontface Backing Diameter | 130 mm |
Cone Backface Backing Diameter | 137 mm |
Cup Frontface Backing Diameter | 220 mm |
Cup Backface Backing Diameter | 223 mm |
Cage Cone Frontface Clearance | 5.1 mm |
Cage Cone Backface Clearance | 2.8 mm |
Effective Center Location | -6.9 mm |
Ring Material | Chrome Steel |
Roller Material | Chrome Steel |
Cage Material | Steel |
Dynamic Radial Load | 129600 lbf |
Static Radial Load | 164700 lbf |
Dynamic Radial Rating(90 Million Revolutions)(C90) | 33525 lbf |
Dynamic Thrust Rating(90 Million Revolutions)(Ca90) | 19845 lbf |
Lubrication | Required |
Temperature Range | -30° to 110 °C |
ABEC Rating | ABEC-1 |
Radial Clearance | Standard (Available in C3/C4/C5) |
RoHS | Compliant |
REACH | Compliant |
Weight | 25.35 lb |
30322 TS (Single Row Tapered Roller Bearings) (Metric) consist of a tapered inner ring assembly and an outer ring. 30322 bore dia is 110 mm. Its out dia is 240 mm. 30322 roller material is Roller_Material. Its seal type is Open. The 30322 TS (Single Row Tapered Roller Bearings) (Metric) can bear both radial and axial loads with ease and provides low friction during operation even under the most severe conditions.
Typical applications include:
Gearing Systems and Transmissions, Thermal Power Coal Transporters, Port Equipment, Rubber and other Industrial applications, Machine Tool Spindles, Gear Reducer, Automotive Drive Axle, Aircraft wheels, Agricultural Wheels, Tensioning Roller, Raking Machine, Construction and Mining Equipment, Railroad Axle-box, etc.
General Selection Factors
Several factors must be considered for choosing tapered roller bearings. These factors include the roller material, design, shields and seals, cage, Annual Bearing Engineering Committee (ABEC) grade, radial clearance, and lubricant, etc.