30302
| Part Number | 30302 |
Brand: LILY  | |
Equivalent: Timken |
| System of Measurement | Metric |
| Type | Bearing |
| Cone Part Number | X30302 |
| Cup Part Number | Y30302 |
| Bearing Type | Roller |
| Roller Bearing Type | Tapered Roller |
| For Load Direction | Combined |
| Construction | Single Row |
| Seal Type | Open |
| Cups Type | Standard |
| Series | 30302 |
| Bore Dia | 15 mm |
| Bore Dia Tolerance | -0.012mm to 0 |
| Outer Dia | 42 mm |
| Outer Dia Tolerance | -0.014mm to 0 |
| Cone Width | 13 mm |
| Cone Width Tolerance | -0.1mm to 0 |
| Cup Width | 11 mm |
| Cup Width Tolerance | -0.15mm to 0 |
| Width | 14.25 mm |
| Width Tolerance | +0.2mm to 0 |
| Cone Backface ToClear Radius | 1.02 mm |
| Cup Backface ToClear Radius | 1.02 mm |
| Cone Frontface Backing Diameter | 19 mm |
| Cone Backface Backing Diameter | 20.5 mm |
| Cup Frontface Backing Diameter | 39.12 mm |
| Cup Backface Backing Diameter | 36.58 mm |
| Cage Cone Frontface Clearance | 2.8 mm |
| Cage Cone Backface Clearance | -0.8 mm |
| Effective Center Location | -4.6 mm |
| Ring Material | Chrome Steel |
| Roller Material | Chrome Steel |
| Cage Material | Steel |
| Dynamic Radial Load | 5850 lbf |
| Static Radial Load | 4995 lbf |
| Dynamic Radial Rating(90 Million Revolutions)(C90) | 1518.75 lbf |
| Dynamic Thrust Rating(90 Million Revolutions)(Ca90) | 740.25 lbf |
| Lubrication | Required |
| Temperature Range | -30° to 110 °C |
| ABEC Rating | ABEC-1 |
| Radial Clearance | Standard (Available in C3/C4/C5) |
| RoHS | Compliant |
| REACH | Compliant |
| Weight | 0.22 lb |
})
30302 TS (Single Row Tapered Roller Bearings) (Metric) consist of a tapered inner ring assembly and an outer ring. 30302 bore dia is 15 mm. Its out dia is 42 mm. 30302 roller material is Roller_Material. Its seal type is Open. The 30302 TS (Single Row Tapered Roller Bearings) (Metric) can bear both radial and axial loads with ease and provides low friction during operation even under the most severe conditions.
Typical applications include:
Gearing Systems and Transmissions, Thermal Power Coal Transporters, Port Equipment, Rubber and other Industrial applications, Machine Tool Spindles, Gear Reducer, Automotive Drive Axle, Aircraft wheels, Agricultural Wheels, Tensioning Roller, Raking Machine, Construction and Mining Equipment, Railroad Axle-box, etc.
General Selection Factors
Several factors must be considered for choosing tapered roller bearings. These factors include the roller material, design, shields and seals, cage, Annual Bearing Engineering Committee (ABEC) grade, radial clearance, and lubricant, etc.
