JLM67041P-JLM67020P
Part Number | JLM67041P-JLM67020P |
Brand: LILY | |
Equivalent: Timken |
System of Measurement | Metric |
Type | Bearing |
Cone Part Number | JLM67041P |
Cup Part Number | JLM67020P |
Bearing Type | Roller |
Roller Bearing Type | Tapered Roller |
For Load Direction | Combined |
Construction | Single Row |
Seal Type | Open |
Cups Type | Standard |
Series | LM67000 |
Bore Dia | 25.413 mm |
Bore Dia Tolerance | -0.012mm to 0 |
Outer Dia | 58.513 mm |
Outer Dia Tolerance | -0.016mm to 0 |
Cone Width | 16.231 mm |
Cone Width Tolerance | -0.1mm to 0 |
Cup Width | 11.561 mm |
Cup Width Tolerance | -0.15mm to 0 |
Width | 15.392 mm |
Width Tolerance | +0.2mm to 0 |
Cone Backface ToClear Radius | 0.76 mm |
Cup Backface ToClear Radius | 1.27 mm |
Cone Frontface Backing Diameter | 32.5 mm |
Cone Backface Backing Diameter | 33.5 mm |
Cup Frontface Backing Diameter | 55.90 mm |
Cup Backface Backing Diameter | 52.07 mm |
Cage Cone Frontface Clearance | 1.3 mm |
Cage Cone Backface Clearance | -0.3 mm |
Effective Center Location | -2.3 mm |
Ring Material | Chrome Steel |
Roller Material | Chrome Steel |
Cage Material | Steel |
Dynamic Radial Load | 10508 lbf |
Static Radial Load | 10035 lbf |
Dynamic Radial Rating(90 Million Revolutions)(C90) | 2722.5 lbf |
Dynamic Thrust Rating(90 Million Revolutions)(Ca90) | 1923.75 lbf |
Lubrication | Required |
Temperature Range | -30° to 110 °C |
ABEC Rating | ABEC-1 |
Radial Clearance | Standard (Available in C3/C4/C5) |
RoHS | Compliant |
REACH | Compliant |
Weight | 0.44 lb |
JLM67041P-JLM67020P TS (Single Row Tapered Roller Bearings) (Metric) consist of a tapered inner ring assembly and an outer ring. JLM67041P-JLM67020P bore dia is 25.413 mm. Its out dia is 58.513 mm. JLM67041P-JLM67020P roller material is Roller_Material. Its seal type is Open. The JLM67041P-JLM67020P TS (Single Row Tapered Roller Bearings) (Metric) can bear both radial and axial loads with ease and provides low friction during operation even under the most severe conditions.
Typical applications include:
Gearing Systems and Transmissions, Thermal Power Coal Transporters, Port Equipment, Rubber and other Industrial applications, Machine Tool Spindles, Gear Reducer, Automotive Drive Axle, Aircraft wheels, Agricultural Wheels, Tensioning Roller, Raking Machine, Construction and Mining Equipment, Railroad Axle-box, etc.
General Selection Factors
Several factors must be considered for choosing tapered roller bearings. These factors include the roller material, design, shields and seals, cage, Annual Bearing Engineering Committee (ABEC) grade, radial clearance, and lubricant, etc.