Bore Dia
Bore Dia
0.635" (1)
0.76" (4)
0.885" (2)
0.938" (1)
0.947" (3)
1.01" (2)
1.072" (1)
1.135" (4)
1.1975" (1)
1.2093" (1)
1.26" (8)
1.375" (1)
1.3787" (1)
1.385" (4)
1.447" (2)
1.508" (3)
1.51" (2)
1.573" (2)
1.584" (1)
1.5906" (1)
1.635" (2)
1.75" (2)
1.7568" (1)
1.76" (2)
1.7717" (2)
1.7907" (1)
1.822" (3)
1.885" (4)
1.929" (2)
2" (2)
2.01" (6)
2.072" (2)
2.5" (2)
2.51" (3)
3" (5)
3.01" (5)
3.0938" (1)
3.5" (2)
3.875" (1)
4" (5)
4.02" (3)
4.4" (2)
4.5" (1)
4.7244" (2)
4.9985" (1)
5" (8)
5.0625" (1)
5.5" (1)
5.8125" (1)
6" (5)
6.5" (2)
6.625" (4)
6.875" (2)
7" (7)
7.25" (1)
7.4803" (2)
7.5" (1)
7.873" (2)
7.875" (1)
8" (4)
8.125" (2)
9" (5)
9.25" (4)
9.5" (5)
9.999" (1)
10" (3)
10.1" (3)
10.2362" (1)
10.75" (5)
11" (9)
11.5" (2)
11.999" (1)
12" (3)
14" (3)
14.5" (1)
14.5095" (1)
15.5" (1)
16" (4)
17" (1)
17.3219" (1)
18" (1)
18.5" (1)
20" (4)
22" (2)
24" (1)
28" (2)
29.5" (1)
30.618" (1)
31.5" (1)
33.5" (1)
34.252" (1)
37" (1)
45.75" (2)
48" (1)
53.25" (1)
Roller Bearing Type
For Load Direction
Outer Dia
Outer Dia
1.625" (5)
1.77" (2)
1.8906" (4)
2" (3)
2.094" (1)
2.1875" (12)
2.3125" (2)
2.3415" (1)
2.5938" (4)
2.625" (5)
2.859" (6)
2.874" (3)
2.879" (1)
2.9375" (2)
3" (2)
3.15" (1)
3.266" (7)
3.271" (1)
3.336" (2)
3.365" (2)
3.672" (6)
4.0313" (1)
4.3125" (2)
4.375" (3)
4.625" (2)
5" (1)
5.25" (6)
6.375" (5)
7" (1)
7.0716" (3)
7.5" (1)
8" (1)
8.5" (3)
8.8" (2)
9.75" (1)
9.875" (2)
10.5" (8)
11" (1)
11.5" (1)
11.811" (2)
12" (5)
12.25" (1)
12.5" (4)
14" (2)
14.125" (2)
14.5" (6)
15.746" (1)
15.747" (1)
15.97" (1)
16" (1)
16.25" (1)
16.5" (6)
17" (2)
18.8956" (1)
18.998" (1)
19" (4)
19.248" (1)
19.5" (4)
20" (2)
21" (1)
21.25" (1)
21.5" (8)
21.75" (2)
22.31" (1)
23" (1)
23.75" (11)
23.9825" (1)
24" (3)
24.5" (1)
26" (3)
26.5" (1)
29" (1)
30" (2)
32" (1)
33" (2)
34" (2)
34.25" (1)
35" (1)
36" (1)
36.125" (1)
37.5" (1)
38" (1)
38.5827" (1)
39" (5)
41" (1)
42" (1)
44.5" (1)
49" (1)
50.5" (2)
58" (1)
60" (1)
Width
Width
0.43" (1)
0.5" (4)
0.531" (3)
0.594" (4)
0.625" (23)
0.629" (1)
0.645" (2)
0.6875" (1)
0.7188" (2)
0.748" (1)
0.765" (5)
0.7656" (5)
0.7874" (3)
0.8438" (6)
0.875" (2)
0.9063" (3)
0.9375" (5)
1" (2)
1.0156" (1)
1.031" (2)
1.062" (4)
1.0625" (2)
1.25" (1)
1.312" (2)
1.3124" (1)
1.3125" (2)
1.3215" (3)
1.375" (3)
1.75" (3)
1.8125" (3)
1.875" (2)
1.9685" (1)
2" (1)
2.062" (1)
2.0625" (1)
2.125" (1)
2.1875" (1)
2.2" (2)
2.248" (1)
2.3125" (8)
2.625" (1)
2.75" (7)
2.812" (1)
2.922" (1)
3" (2)
3.1103" (2)
3.235" (1)
3.25" (6)
3.495" (1)
3.500" (2)
3.615" (1)
3.625" (4)
3.75" (2)
4" (4)
4.125" (3)
4.25" (1)
4.375" (2)
4.49" (1)
4.5625" (1)
4.625" (1)
4.735" (1)
4.75" (3)
4.7969" (1)
4.7985" (1)
5" (10)
5.2" (1)
5.25" (2)
5.375" (9)
5.5" (3)
5.75" (2)
5.9" (1)
6" (4)
6.25" (2)
6.375" (1)
6.485" (1)
6.5" (2)
6.75" (1)
7" (3)
7.5" (2)
7.75" (4)
8" (1)
8.5" (1)
8.75" (1)
9" (2)
9.5" (1)
10" (1)
11" (1)
11.235" (1)
Seal Type
Product Categories Roller Bearings Tapered Roller Bearings / Thrust Tapered Roller Bearings

Thrust Tapered Roller Bearings

226 Products
TTHD
TTHD
Consists of two thrust tapered races, rollers and cage.Generally a heavy-duty bearing that can operate at relatively high speeds.Bearing of choice for axial positions in a wide variety of applications including oil well swivels, pulp refiners, extruders and piercing mill thrust blocks.
TTHDFL-V-Flat
TTHDFL-V-Flat
Consists of one thrust tapered race, one flat race, rollers and cage. Most sizes utilize pin-type cages with hardened pins through the center of the rollers, allowing closer roller spacing to maximize load capacity. Smaller sizes have brass cages designed for unidirectional retention of rollers. Comb
TTHDFLSA
TTHDFLSA
Same basic roller and raceway design as the TTHDFL, except that the lower race is composed of two pieces whose faces are spherically ground to permit self-alignment under conditions of initial misalignment. TTHDFLSA bearings should not be used if dynamic misalignment (changing under load) is expecte
TTSP
TTSP
Comprised of two thrust tapered races, rollers, cage and an outside retainer which holds the components together during shipping and installation. Off-apex roller arrangement. These are light-duty thrust bearings which are used extensively in the steering pivot positions of automotive and other indu
TTC
TTC
Comprised of two thrust tapered races, rollers and an outside retainer which holds the components together during shipping and installation. Full complement design (cageless). These thrust bearings are specifically designed for oscillating applications.

Tapered thrust-type bearings are engineered for true rolling motion, which offers increased bearing life and additional load-bearing capacity.

logo
linkedin youtube

Email:

Address: Room 301, 6st Block, #525 Yuanjiang Road, Minhang District, Shanghai, China

Creating value for customers is the core of our business. We focus on our customers' perspectives and goals rather than simply selling products. That's why we have many long-term clients and how we use our 20+ years of industry experience to provide advanced services such as custom designs, model selection, and pre-sales and after-sales services.

Quick Links

© 2024 Lily Bearing • All Rights Reserved
loading..