11 min read
Richard: Mar 31, 2026 1:13:16 AM
The most common sizing mistake we see: someone measures their shaft with a tape measure, rounds to the nearest half-inch, and orders the wrong bore....
12 min read
Robert: Mar 30, 2026 4:21:59 AM
Cast iron is the default housing material for pillow block bearings—and for good reason. But "cast iron" isn't a single material. There's HT150,...
10 min read
Robert: Mar 24, 2026 9:43:47 PM
Quick Answer — 8 Steps Clean and inspect the shaft Slide the bearing into position Lightly bolt the housing down Set the final mounting position by...
7 min read
Richard: Dec 31, 2025 4:44:27 AM
The difference between a pillow block bearing and a flange bearing comes down to one thing: shaft orientation. Shaft parallel to the mounting...
9 min read
Richard: Aug 5, 2025 3:32:57 AM
A pillow block bearing is a pre-assembled unit that mounts a bearing insert into a housing, ready to bolt directly onto a machine frame. Unlike loose...
8 min read
Richard: Jul 18, 2025 1:51:24 AM
Proper lubrication is paramount for the optimal performance and extended lifespan of pillow block bearings. Without it, these critical components are...
