ZKLDF100

d 100 mm Sizes d > 460 mm available by agreement
D 185 mm
H 38 mm
16 Number of fixing holes in inner ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes.
2 Number of retaining screws
15 Number of fixing holes in outer ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes.
3 Number of extraction threads
a 5,4 mm Fixing holes in inner ring
D1 161 mm
D2 136 mm
D3 158 mm
d1 5,6 mm Fixing holes in inner ring
d2 10 mm Fixing holes in inner ring
d3 5,6 mm Fixing holes in outer ring
G M5 Extraction thread
H1 25 mm
J 112 mm Fixing holes in inner ring
J1 170 mm Fixing holes in outer ring
t 18 x 20 ° Pitch t Including retaining screws and extraction threads Quantity X t
m 3,8 kg ≈ Mass
MA 8,5 Nm Screw tightening torque Tightening torque for screws to DIN 912, grade 10.9.
Ca 71000 N Basic dynamic load rating, axial
C0a 265000 N Basic static load rating, axial
Cua 10100 N Fatigue limit load, axial
nG 5000 1/min Limiting speed The limiting speeds increased by a factor of two are valid for bearings of the current generation with the internal suffix -B.
caL 1200 N/µm Axial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
crL 350 N/µm Radial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
ckL 3600 Nm/mrad Tilting rigidity of the bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
caL 2200 N/µm Axial rigidity of rolling element set
crL 350 N/µm Radial rigidity of rolling element set
ckL 5000 Nm/mrad Tilting rigidity of rolling element set

Hole pattern, measuring head suitable for
Hole pattern
2 retaining screws (1)

  • Request a Quote

Recommend