YRTSM460

d 460 mm Tolerance: 0/-0,023
D 600 mm Tolerance: 0/-0,028
H 70 mm
46 Number of fixing holes in inner ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes.
45 Number of fixing holes in outer ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes.
2 Number of retaining screws
3 Number of extraction threads
a 8,2 mm Fixing holes in inner ring
C 22 mm
D1 max 560,9 mm Diameter of inner ring for design of adjacent construction
DM 557,6 mm Diameter of dimensional scale on shaft locating washer
d1 9,3 mm Fixing holes in inner ring
d2 15 mm Fixing holes in inner ring
d3 9,3 mm Fixing holes in outer ring
G M12 Extraction thread
H1 46 mm
H2 24 mm
HM 19 mm
J 482 mm Fixing holes in inner ring
J1 580 mm Fixing holes in outer ring
t 48 x 7,5° Pitch t Including retaining screws and extraction threads Quantity X t
m 45 kg ≈ Mass
MA 34 Nm Screw tightening torque Tightening torque for screws to DIN EN ISO 4762, grade 10.9.
Ca 221000 N Basic dynamic load rating, axial
C0a 1690000 N Basic static load rating, axial
Cr 168000 N Basic dynamic load rating, radial
C0r 570000 N Basic static load rating, radial
Cur 64000 N Fatigue limit load, radial
Cua 145000 N Fatigue limit load, axial
nG 560 1/min Limiting speed for electronic limiting speed and bearing
nRef 15 1/min Limiting speed for reference travel
caL 8900 N/µm Axial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
crL 1800 N/µm Radial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
ckL 280000 Nm/mrad Tilting rigidity of the bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
caL 25400 N/µm Axial rigidity of rolling element set
crL 9500 N/µm Radial rigidity of rolling element set
ckL 843000 Nm/mrad Tilting rigidity of rolling element set
Mm 15738 kg * cm^2 Mass moment of inertia for rotating inner ring IR
Mm 7379 kg * cm^2 Mass moment of inertia for rotating outer ring AU

Hole pattern
2 retaining screws (1)

  • Request a Quote

Recommend