YRTCMA260-XL

d 260 mm Tolerance: 0/-0,018
D 385 mm Tolerance: 0/-0,02
H 57,5 mm Attention! Dimension differs from the axial/radial bearing YRT.
34 Number of fixing holes in inner ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes.
33 Number of fixing holes in outer ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes.
2 Number of retaining screws
3 Number of extraction threads
a 8,2 mm Fixing holes in inner ring
C 18 mm
D1 345 mm Diameter of shaft locating washer for design of adjacent construction
DM max 347 mm Diameter of dimensional scale on inner ring
d1 9,3 mm Fixing holes in inner ring
d2 15 mm Fixing holes in inner ring
d3 9,3 mm Fixing holes in outer ring
G M12 Extraction thread
H1 36,5 mm
H2 21 mm Attention! Dimension differs from the axial/radial bearing YRT.
J 280 mm Fixing holes in inner ring
J1 365 mm Fixing holes in outer ring
t 36 x 10° Pitch t Including retaining screws and extraction threads Quantity X t
m 18,7 kg ≈ Mass
MA 34 Nm Screw tightening torque Tightening torque for screws to DIN EN ISO 4762, grade 10.9.
Ca 168000 N Basic dynamic load rating, axial
C0a 1090000 N Basic static load rating, axial
Cr 140000 N Basic dynamic load rating, radial
C0r 355000 N Basic static load rating, radial
Cur 37500 N Fatigue limit load, radial
Cua 74000 N Fatigue limit load, axial
nG 300 1/min Limiting speed For high operating durations or continuous operation, please contact us.
MR 4 Nm Bearing frictional torque
caL 6900 N/µm Axial rigidity Rigidity values taking account of the rolling element set, deformation of the bearing rings and the screw connections.
crL 5300 N/µm Radial rigidity Rigidity values taking account of the rolling element set, deformation of the bearing rings and the screw connections.
ckL 82000 Nm/mrad Tilting rigidity Rigidity values taking account of the rolling element set, deformation of the bearing rings and the screw connections.
caL 19000 N/µm Axial rigidity of rolling element set
crL 8100 N/µm Radial rigidity of rolling element set
ckL 265000 Nm/mrad Tilting rigidity of rolling element set

Hole pattern, measuring head suitable for radial screw mounting
2 retaining screws (1)

  • Request a Quote

Recommend