YRTCM150-XL

d 150 mm Tolerance: 0/-0,013
D 240 mm Tolerance: 0/-0,015
H 41 mm Attention! H and H1 are 1 mm higher than the standard bearing YRT.
34 Number of fixing holes in inner ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes.
33 Number of fixing holes in outer ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes.
The measuring head cannot be mounted between the fixing holes or the heads of the fixing screws. Two holes for fixing screws therefore remain unused in the bearing outer ring.
2 Number of retaining screws
3 Number of extraction threads
a 6,2 mm Fixing holes in inner ring
C 12 mm
D1 max 214,5 mm Diameter of inner ring for design of adjacent construction
d1 7 mm Fixing holes in inner ring
d2 11 mm Fixing holes in inner ring
d3 7 mm Fixing holes in outer ring
G M8 Extraction thread
H1 27 mm Attention! H and H1 are 1 mm higher than the standard bearing YRT.
H2 14 mm
HM 10 mm
J 165 mm Fixing holes in inner ring
J1 225 mm Fixing holes in outer ring
t 36 x 10° Pitch t Including retaining screws and extraction threads Quantity X t
m 6,4 kg ≈ Mass
MA 14 Nm Screw tightening torque Tightening torque for screws to DIN EN ISO 4762, grade 10.9.
Ca 128000 N Basic dynamic load rating, axial
C0a 650000 N Basic static load rating, axial
Cr 75000 N Basic dynamic load rating, radial
C0r 146000 N Basic static load rating, radial
Cua 52000 N Fatigue limit load, axial
Cur 17600 N Fatigue limit load, radial
caL 3800 N/µm Axial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
crL 3200 N/µm Radial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
ckL 17000 Nm/mrad Tilting rigidity of the bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
caL 12000 N/µm Axial rigidity of rolling element set
crL 4800 N/µm Radial rigidity of rolling element set
ckL 61000 Nm/mrad Tilting rigidity of rolling element set

Hole pattern
2 retaining screws (1)

  • Request a Quote

Recommend