YRTC850-XL

d 850 mm Tolerance: 0/-0,05
D 1095 mm Tolerance: 0/-0,063
H 124 mm
58 Number of fixing holes in inner ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes.
54 Number of fixing holes in outer ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes.
2 Number of retaining screws
6 Number of extraction threads
a 17 mm Fixing holes in inner ring
C 37 mm
D1 max 1018 mm Diameter of inner ring for design of adjacent construction
d1 18 mm Fixing holes in inner ring
d2 26 mm Fixing holes in inner ring
d3 18 mm Fixing holes in outer ring
G M12 Extraction thread
H1 80,5 mm
H2 43,5 mm
J 890 mm Fixing holes in inner ring
J1 1055 mm Fixing holes in outer ring
t 60 x 6° Pitch t Including retaining screws and extraction threads Quantity X t
m 253 kg ≈ Mass
MA 284 Nm Screw tightening torque Tightening torque for screws to DIN EN ISO 4762, grade 10.9.
Ca 900000 N Basic dynamic load rating, axial
C0a 8500000 N Basic static load rating, axial
Cr 520000 N Basic dynamic load rating, radial
C0r 1690000 N Basic static load rating, radial
Cur 130000 N Fatigue limit load, radial
Cua 470000 N Fatigue limit load, axial
nG 50 1/min Limiting speed Continuous operation
MR 130 Nm Bearing frictional torque
caL 26500 N/µm Axial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
crL 11900 N/µm Radial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
ckL 2351000 Nm/mrad Tilting rigidity of the bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
caL 61900 N/µm Axial rigidity of rolling element set
crL 12000 N/µm Radial rigidity of rolling element set
ckL 6772000 Nm/mrad Tilting rigidity of rolling element set

Hole pattern
2 retaining screws (1)

  • Request a Quote

Recommend