YRTC650-XL

d 650 mm Tolerance: 0/-0,038
D 870 mm Tolerance: 0/-0,05
H 122 mm
46 Number of fixing holes in inner ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes.
42 Number of fixing holes in outer ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes.
2 Number of retaining screws
6 Number of extraction threads
a 13 mm Fixing holes in inner ring
C 34 mm
D1 max 800 mm Diameter of inner ring for design of adjacent construction
d1 14 mm Fixing holes in inner ring
d2 20 mm Fixing holes in inner ring
d3 14 mm Fixing holes in outer ring
G M12 Extraction thread
H1 78 mm
H2 44 mm
J 680 mm Fixing holes in inner ring
J1 830 mm Fixing holes in outer ring
t 48 x 7,5° Pitch t Including retaining screws and extraction threads Quantity X t
m 170 kg ≈ Mass
MA 116 Nm Screw tightening torque Tightening torque for screws to DIN EN ISO 4762, grade 10.9.
Ca 916000 N Basic dynamic load rating, axial
C0a 6800000 N Basic static load rating, axial
Cr 458000 N Basic dynamic load rating, radial
C0r 1300000 N Basic static load rating, radial
Cur 108000 N Fatigue limit load, radial
Cua 405000 N Fatigue limit load, axial
nG 170 1/min Limiting speed Swivel type operation, short operating duration
MR 70 Nm Bearing frictional torque
caL 20600 N/µm Axial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
crL 7300 N/µm Radial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
ckL 1193000 Nm/mrad Tilting rigidity of the bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
caL 51400 N/µm Axial rigidity of rolling element set
crL 8200 N/µm Radial rigidity of rolling element set
ckL 3554000 Nm/mrad Tilting rigidity of rolling element set

Hole pattern
2 retaining screws (1)

  • Request a Quote

Recommend