YRTC580-XL

d 580 mm Tolerance: 0/-0,025
D 750 mm Tolerance: 0/-0,035
H 90 mm
46 Number of fixing holes in inner ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes.
42 Number of fixing holes in outer ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes.
2 Number of retaining screws
6 Number of extraction threads
a 11 mm Fixing holes in inner ring
C 30 mm
D1 max 700 mm Diameter of inner ring for design of adjacent construction
d1 11,4 mm Fixing holes in inner ring
d2 18 mm Fixing holes in inner ring
d3 11,4 mm Fixing holes in outer ring
G M12 Extraction thread
H1 60 mm
H2 30 mm
J 610 mm Fixing holes in inner ring
J1 720 mm Fixing holes in outer ring
t 48 x 7,5° Pitch t Including retaining screws and extraction threads Quantity X t
m 89 kg ≈ Mass
MA 68 Nm Screw tightening torque Tightening torque for screws to DIN EN ISO 4762, grade 10.9.
Ca 577000 N Basic dynamic load rating, axial
C0a 4450000 N Basic static load rating, axial
Cr 235000 N Basic dynamic load rating, radial
C0r 730000 N Basic static load rating, radial
Cur 62000 N Fatigue limit load, radial
Cua 255000 N Fatigue limit load, axial
nG 80 1/min Limiting speed Continuous operation
MR 60 Nm Bearing frictional torque
caL 11900 N/µm Axial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
crL 2900 N/µm Radial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
ckL 735000 Nm/mrad Tilting rigidity of the bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
caL 41800 N/µm Axial rigidity of rolling element set
crL 11200 N/µm Radial rigidity of rolling element set
ckL 1960000 Nm/mrad Tilting rigidity of rolling element set

Hole pattern
2 retaining screws (1)

  • Request a Quote

Recommend