YRTC395-XL

d 395 mm Tolerance: 0/-0,023
D 525 mm Tolerance: 0/-0,028
H 65 mm
46 Number of fixing holes in inner ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes.
45 Number of fixing holes in outer ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes.
2 Number of retaining screws
3 Number of extraction threads
a 8,2 mm Fixing holes in inner ring
C 20 mm
D1 max 487,7 mm Diameter of inner ring for design of adjacent construction
d1 9,3 mm Fixing holes in inner ring
d2 15 mm Fixing holes in inner ring
d3 9,3 mm Fixing holes in outer ring
G M12 Extraction thread
H1 42,5 mm
H2 22,5 mm
J 415 mm Fixing holes in inner ring
J1 505 mm Fixing holes in outer ring
t 48 x 7,5° Pitch t Including retaining screws and extraction threads Quantity X t
m 32,5 kg ≈ Mass
MA 34 Nm Screw tightening torque Tightening torque for screws to DIN EN ISO 4762, grade 10.9.
Ca 265000 N Basic dynamic load rating, axial
C0a 2190000 N Basic static load rating, axial
Cr 200000 N Basic dynamic load rating, radial
C0r 640000 N Basic static load rating, radial
Cur 56000 N Fatigue limit load, radial
Cua 143000 N Fatigue limit load, axial
nG 150 1/min Limiting speed For high operating durations or continuous operation, please contact us.
MR 15 Nm Bearing frictional torque Measurement speed n const = 5 1/min, bearing temperature +50°C, after grease distribution cycle; frictional torque may increase by 2,5 times up to the limiting speed.
caL 9900 N/µm Axial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
crL 5800 N/µm Radial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
ckL 228000 Nm/mrad Tilting rigidity of the bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
caL 37000 N/µm Axial rigidity of rolling element set
crL 13000 N/µm Radial rigidity of rolling element set
ckL 1002000 Nm/mrad Tilting rigidity of rolling element set

Hole pattern
2 retaining screws (1)

  • Request a Quote

Recommend