YRTC120-XL

d 120 mm Tolerance: 0/-0,01
D 210 mm Tolerance: 0/-0,015
H 40 mm
22 Number of fixing holes in inner ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes.
21 Number of fixing holes in outer ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes.
2 Number of retaining screws
3 Number of extraction threads
a 6,2 mm Fixing holes in inner ring
C 12 mm
D1 max 185 mm Diameter of inner ring for design of adjacent construction
d1 7 mm Fixing holes in inner ring
d2 11 mm Fixing holes in inner ring
d3 7 mm Fixing holes in outer ring
G M8 Extraction thread
H1 26 mm
H2 14 mm
J 135 mm Fixing holes in inner ring
J1 195 mm Fixing holes in outer ring
t 24 x 15° Pitch t Including retaining screws and extraction threads Quantity X t
m 4,61 kg ≈ Mass
MA 14 Nm Screw tightening torque Tightening torque for screws to DIN EN ISO 4762, grade 10.9.
Ca 112000 N Basic dynamic load rating, axial
C0a 520000 N Basic static load rating, axial
Cr 69000 N Basic dynamic load rating, radial
C0r 124000 N Basic static load rating, radial
Cur 15800 N Fatigue limit load, radial
Cua 43500 N Fatigue limit load, axial
caL 2900 N/µm Axial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
crL 2600 N/µm Radial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
ckL 9900 Nm/mrad Tilting rigidity of the bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
caL 9800 N/µm Axial rigidity of rolling element set
crL 4000 N/µm Radial rigidity of rolling element set
ckL 35500 Nm/mrad Tilting rigidity of rolling element set

Hole pattern
2 retaining screws (1)

  • Request a Quote

Recommend