YRTC1030-XL

d 1030 mm Tolerance: 0/-0,063
D 1300 mm Tolerance: 0/-0,08
H 145 mm
70 Number of fixing holes in inner ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes.
66 Number of fixing holes in outer ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes.
2 Number of retaining screws
6 Number of extraction threads
a 17 mm Fixing holes in inner ring
C 40 mm
D1 max 1215 mm Diameter of inner ring for design of adjacent construction
d1 18 mm Fixing holes in inner ring
d2 26 mm Fixing holes in inner ring
d3 18 mm Fixing holes in outer ring
G M16 Extraction thread
H1 92,5 mm
H2 52,5 mm
J 1075 mm Fixing holes in inner ring
J1 1255 mm Fixing holes in outer ring
t 72 x 5° Pitch t Including retaining screws and extraction threads Quantity X t
m 375 kg ≈ Mass
MA 284 Nm Screw tightening torque Tightening torque for screws to DIN EN ISO 4762, grade 10.9.
Ca 1000000 N Basic dynamic load rating, axial
C0a 10300000 N Basic static load rating, axial
Cr 577000 N Basic dynamic load rating, radial
C0r 2050000 N Basic static load rating, radial
Cur 149000 N Fatigue limit load, radial
Cua 540000 N Fatigue limit load, axial
nG 40 1/min Limiting speed Continuous operation
MR 250 Nm Bearing frictional torque
caL 36400 N/µm Axial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
crL 11200 N/µm Radial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
ckL 5400000 Nm/mrad Tilting rigidity of the bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
caL 74900 N/µm Axial rigidity of rolling element set
crL 14200 N/µm Radial rigidity of rolling element set
ckL 11165000 Nm/mrad Tilting rigidity of rolling element set

Hole pattern
2 retaining screws (1)

  • Request a Quote

Recommend