YRTC100-XL

d 100 mm Tolerance: 0/-0,01
D 185 mm Tolerance: 0/-0,015
H 38 mm
16 Number of fixing holes in inner ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes.
15 Number of fixing holes in outer ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes.
2 Number of retaining screws
3 Number of extraction threads
a 5,4 mm Fixing holes in inner ring
C 12 mm
D1 max 161 mm Diameter of inner ring for design of adjacent construction
d1 5,6 mm Fixing holes in inner ring
d2 10 mm Fixing holes in inner ring
d3 5,6 mm Fixing holes in outer ring
G M5 Extraction thread
H1 25 mm
H2 13 mm
J 112 mm Fixing holes in inner ring
J1 170 mm Fixing holes in outer ring
t 18 x 20° Pitch t Including retaining screws and extraction threads Quantity X t
m 3,65 kg ≈ Mass
MA 8,5 Nm Screw tightening torque Tightening torque for screws to DIN EN ISO 4762, grade 10.9.
Ca 105000 N Basic dynamic load rating, axial
C0a 455000 N Basic static load rating, axial
Cr 50000 N Basic dynamic load rating, radial
C0r 88000 N Basic static load rating, radial
Cur 11800 N Fatigue limit load, radial
Cua 39500 N Fatigue limit load, axial
caL 2650 N/µm Axial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
crL 2250 N/µm Radial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
ckL 6600 Nm/mrad Tilting rigidity of the bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
caL 8700 N/µm Axial rigidity of rolling element set
crL 3700 N/µm Radial rigidity of rolling element set
ckL 23500 Nm/mrad Tilting rigidity of rolling element set

Hole pattern
2 retaining screws (1)

  • Request a Quote

Recommend