THK SHS-C Block

The flange of the LM block has tapped holes. It can be mounted from the top or the bottom. It can be used in places where the table cannot have through holes for mounting bolts.

Model No. Dimensions Basic load rating
Overall Block Rail Radial
Height
M
Width
W
Length
L
B C S H Pitch
F
d1xd2xh Dynamic
C(KN)
Static
C0(KN)
SHS15C1SS BLOCK 24 47 64.4 38 30 M5 4.4 60 4.5x7.5x5.3 14.2 24.2
SHS15C1SSC1 BLOCK 24 47 64.4 38 30 M5 4.4 60 4.5x7.5x5.3 14.2 24.2
SHS20C1SS BLOCK 30 63 79 53 40 M6 5.4 60 6x9.5x8.5 22.3 38.4
SHS20C1SSC1 BLOCK 30 63 79 53 40 M6 5.4 60 6x9.5x8.5 22.3 38.4
SHS25C1SS BLOCK 36 70 92 57 45 M8 6.8 60 7x11x9 31.7 52.4
SHS25C1SSC1 BLOCK 36 70 92 57 45 M8 6.8 60 7x11x9 31.7 52.4
SHS30C1SS BLOCK 42 90 106 72 52 M10 8.5 80 9x14x12 44.8 66.6
SHS30C1SSC1 BLOCK 42 90 106 72 52 M10 8.5 80 9x14x12 44.8 66.6
SHS35C1SS BLOCK 48 100 122 82 62 M10 8.5 80 9x14x12 62.3 96.6
SHS35C1SSC1 BLOCK 48 100 122 82 62 M10 8.5 80 9x14x12 62.3 96.6
SHS45C1SS BLOCK 60 120 140 100 80 M12 10.5 105 14x20x17 82.8 126
SHS45C1SSC1 BLOCK 60 120 140 100 80 M12 10.5 105 14x20x17 82.8 126
SHS55C1SS BLOCK 70 140 171 116 95 M14 12.5 120 16x23x20 128 197
SHS55C1SSC1 BLOCK 70 140 171 116 95 M14 12.5 120 16x23x20 128 197
SHS65C1SS BLOCK 90 170 221 142 110 M16 14.5 150 18x26x22 205 320
SHS65C1SSC1 BLOCK 90 170 221 142 110 M16 14.5 150 18x26x22 205 320

Hot Recommend

Navigation