Open Ends | Lily Bearing
us us us us es cn

Open Ends

201311820324211357Drawn cup needle roller bearings with open ends are constructional units consisting of thin-walled outer rings formed without cutting, and needle roller and cage assemblies. Drawn cup needle roller bearings with open ends are also available in full complement needle roller sets. The bearing mainly comprises single-row parts.

Special features:

High load-carrying capacity

Suitable for high speeds

Particularly easy to install

Drawn cup needle roller bearings with open ends can be either open or sealed. The thin-walled outer cups and lack of an inner ring mean that drawn cup needle roller bearings with open ends require little radial space. If shoulders, snap rings, etc. are not used for axial fixing, the housing bore can be made easily and economically.

  For shaft diameter
in mm
Features
HK 2 - 60 to DIN 618-1/ISO 3245
HK..-RS 8 - 50 lip seal on one side, to DIN 618-2
HK..-2RS 8 - 50 lip seals on both sides, to DIN 618-2
HN 8 - 50 full complement needle roller set, to DIN 618-1/ISO 3245
SCE 1/8 " - 3 1/2 " to ABMA 18.2 - 1982, inch sizes
SCE..-P 1/4 " - 1 1/2 " lip seal on one side, to ABMA 18.2 - 1982, inch sizes
SCE..-PP 1/2 " - 1 1/2 " lip seals on both sides, to ABMA 18.2 - 1982, inch sizes
SCH 5/16 " - 1 3/8 " heavy series to ABMA 18.2 - 1982, inch sizes
SCH..-P 5/16 " - 1 1/4 " heavy series, lip seal on one side, to ABMA 18.2 - 1982, inch sizes
SCH..-PP 7/16 " - 1 1/4 " heavy series, lip seals on both sides, to ABMA 18.2 - 1982, inch sizes

 

Hot Recommendation

Navigation