Drawn Cup Needle Roller Bearings with Closed End: As the name suggests are needle roller bearings with a deep drawn thin-walled outer ring with open ends. They are characterised by low sectional height and high load carrying ability. They are ideal where a very compact and economical bearing arrangement is required. The RS and series are fitted with a nitrile rubber seal.
Benefits: Compact low cross section design, high load bearing, low cost and economical, available in sealed and unsealed options. Requires only a bored housing for deployment, the simplest of housing designs.
|For shaft diameter
|BK||3 - 45||to DIN 618-1/ISO 3245|
|BK..-RS||14 - 25||lip seal on one side|
|BCE||1/8 " - 2 3/4 "||to ABMA 18.2 - 1982, inch sizes|
|BCE..-P||1/4 " - 3/4 "||lip seal on one side, to ABMA 18.2 - 1982, inch sizes|
|BCH||5/16 " - 1 3/8 "||heavy series to ABMA 18.2 - 1982, inch sizes|
|BCH..-P||5/16 " - 1 3/8 "||lip seal on one side, heavy series to ABMA 18.2 - 1982, inch sizes|