Home Blog Drylin Bearing System Reduces Driving Force

Drylin Bearing System Reduces Driving Force

Release time : 2015-06-15 11:14:26
These include manually adjustable doors, guards, partitions and locks, as well as light handling tasks. The lubricant-free plastic sliding plain bearings ensure the hybrid linear system is robust, insensitive to dirt and humidity, as well as being lightweight and cost-competitive. The polymer rollers, which according to the company are also maintenance-free, allow for easy manual adjustment of heavy machine doors and protective doors that can weigh up to 50kg. At a defined installation position, the Needle Roller Bearings, which carries the main load, reduces the overall driving force by a factor of between four and five - this is said to ease manual operation considerably. The principle of the installation position for the hybrid bearing is such that the main load is on the roller bearing, which reduces the driving momentum required. The plastic sliders compensate any lateral forces. The Igus Drylin W is a modular system made of hard anodised aluminium profiles, die-cast zinc housings, stainless steel bearings or aluminium and plastic plain bearings. The variety of options within this system allows engineers to optimise the available design space, the company said. Combined with different carriage lengths, the rail widths permit many combinations. The four design sizes range from 6mm to a shaft diameter of 20mm. All the Drylin W guide systems work without lubricants as dry-running systems, which means that they do not have to be serviced during operation. The linear bearings are offered with the polymer sliding bearings Iglidur J or Iglidur J200. Both of these materials offer low wear and low friction values. In addition, they are resistant to chemicals, help dampen vibrations, and are impervious to moisture that might accumulate in humid environments. The hybrid linear bearing design is based around the Drylin W linear guide family. Igus has modelled the Drylin WJRM system in such a way that the roller fits inside without increasing the overall design width, which remains at 18mm. Standard economic guide profiles can be used, which are available in three styles for 10mm diameter shafts, as individual rails for a flexible guiding distance, or as double rails with centre spacing of 40mm or 80mm, which allow self-aligning for quick installation.