NG Series Type A Thin Section Bearings

thin-section-bearing-500x500A deep groove bearing with reduced shoulder on one side of inner or outer race ball path. Snapover assembly permits use of a one-piece circular pocket ring separator and greater ball complement. These bearings will accept radial load and single direction thrust load and are normally used in conjunction with another bearing of similar construction. Type A bearings require the application of thrust to establish contact angle.

Product Number Bore Dia (d) Outer Dia (D) Width (B) Dynamic (lbs) Static (lbs) Weight (lbs)
Thrust Radial Thrust
Ng040ar0 3.9998 6.0003 0.7500" 3.610
Ng042ar0 4.2498 6.2503 1″ 3.830
Ng045ar0 4.4998 6.5003 1″ 3.950
Ng047ar0 4.7498 6.7503 1″ 4.170
Ng050ar0 4.9998 7.0003 1″ 4.420
Ng055ar0 5.4998 7.5003 1″ 4.730
Ng060ar0 5.9998 8.0003 1″ 5.070
Ng065ar0 6.4998 8.5003 1″ 5.410
Ng070ar0 6.9998 9.0003 1″ 5.870
Ng070cp0 6.9998 9.0003 1″
Ng075ar0 7.4998 9.5003 1″ 6.200
Ng080ar0 7.9998 10.0003 1″ 6.540
Ng090ar0 8.9998 11.0003 1″ 7.220
Ng100ar0 9.9998 12.0003 1″ 8.000
Ng110ar0 10.9998 13.0003 1″ 8.680
Ng120ar0 11.9998 14.0003 1″ 9.470
Ng140ar0 13.9998 16.0003 1″ 10.900
Ng160ar0 15.9998 18.0003 1″ 12.400
Ng180ar0 17.9998 20.0003 1″ 13.800
Ng200ar0 19.9998 22.0003 1″ 15.200
Ng220ar0 21.9998 24.0003 1″ 16.630
Ng250ar0 24.9998 27.0003 1″ 18.800
Ng300ar0 29.9998 32.0003 1″ 22.500
Ng350ar0 34.9998 37.0003 1″ 26.200
Ng400ar0 39.9998 42.0003 1″ 29.800

Hot Recommend

Navigation