ND Series Type A Thin Section Bearings

thin-section-bearing-500x500A deep groove bearing with reduced shoulder on one side of inner or outer race ball path. Snapover assembly permits use of a one-piece circular pocket ring separator and greater ball complement. These bearings will accept radial load and single direction thrust load and are normally used in conjunction with another bearing of similar construction. Type A bearings require the application of thrust to establish contact angle.

Product Number Bore Dia (d) Outer Dia (D) Width (B) Dynamic (lbs) Static (lbs) Weight (lbs)
Thrust Radial Thrust
Nd040ar0 3.9998 5.0003 0.5000" 0.800
Nd042ar0 4.2498 5.2503 0.5000" 0.840
Nd045ar0 4.4998 5.5003 0.5000" 0.880
Nd047ar0 4.7498 5.7503 0.5000" 0.930
Nd050ar0 4.9998 6.0003 0.5000" 0.980
Nd055ar0 5.4998 6.5003 0.5000" 1.060
Nd060ar0 5.9998 7.0003 0.5000" 1.150
Nd065ar0 6.4998 7.5003 0.5000" 1.240
Nd070ar0 6.9998 8.0003 0.5000" 1.330
Nd075ar0 7.4998 8.5003 0.5000" 1.420
Nd080ar0 7.9998 9.0003 0.5000" 1.520
Nd090ar0 8.9998 10.0003 0.5000" 1.690
Nd100ar0 9.9998 11.0003 0.5000" 1.870
Nd110ar0 10.9998 12.0003 0.5000" 2.050
Nd120ar0 11.9998 13.0003 0.5000" 2.230
Nd140ar0 13.9998 15.0003 0.5000" 2.570
Nd160ar0 15.9998 17.0003 0.5000" 2.930
Nd180ar0 17.9998 19.0003 0.5000" 3.290
Nd200ar0 19.9998 21.0003 0.5000" 3.650
Nd210ar0 20.9998 22.0003 0.5000" 3.830
Nd250ar0 24.9998 26.0003 0.5000" 4.540
Nd300ar0 29.9998 31.0003 0.5000" 5.440

Hot Recommend

Navigation