Loading results…

NC Series Type A Thin Section BearingsKAYDON Part No.

thin-section-bearing-500x500A deep groove bearing with reduced shoulder on one side of inner or outer race ball path. Snapover assembly permits use of a one-piece circular pocket ring separator and greater ball complement. These bearings will accept radial load and single direction thrust load and are normally used in conjunction with another bearing of similar construction. Type A bearings require the application of thrust to establish contact angle.

Product Number Bore Dia (d) Outer Dia (D) Width (B) Dynamic (lbs) Static (lbs) Weight (lbs)
Thrust Radial Thrust
NC040AR0 3.9998" 4.7503" 0.3750" 1153 2770 2550 7360 0.440
NC042AR0 4.2498" 5.0003" 0.3750" 1194 2880 2710 7820 0.460
NC045AR0 4.4998" 5.2503" 0.3750" 1234 2990 2860 8270 0.490
NC047AR0 4.7498" 5.5003" 0.3750" 1274 3100 3020 8720 0.510
NC050AR0 4.9998" 5.7503" 0.3750" 1313 3200 3180 9170 0.540
NC055AR0 5.4998" 6.2503" 0.3750" 1374 3370 3440 9920 0.580
NC060AR0 5.9998" 6.7503" 0.3750" 1448 3580 3750 10820 0.640
NC065AR0 6.4998" 7.2503" 0.3750" 1519 3770 4060 11720 0.680
NC070AR0 6.9998" 7.7503" 0.3750" 1575 3930 4320 12470 0.740
NC075AR0 7.4998" 8.2503" 0.3750" 1642 4120 4630 13380 0.780
NC080AR0 7.9998" 8.7503" 0.3750" 1708 4300 4950 14280 0.840
NC090AR0 8.9998" 9.7503" 0.3750" 1822 4630 5520 15930 0.980
NC100AR0 9.9998" 10.7503" 0.3750" 1942 4970 6140 17730 1.040
NC110AR0 10.9998" 11.7503" 0.3750" 2047 5280 6720 19390 1.140
NC120AR0 11.9998" 12.7503" 0.3750" 2147 5570 7290 21040 1.230
NC140AR0 13.9998" 14.7503" 0.3750" 2347 6170 8490 24500 1.430
NC160AR0 15.9998" 16.7503" 0.3750" 2533 6730 9680 27950 1.630
NC180AR0 17.9998" 18.7503" 0.3750" 2707 7280 10880 31410 1.830
NC200AR0 19.9998" 20.7503" 0.3750" 2863 7780 12030 34720 2.030
NC250AR0 24.9998" 25.7503" 0.3750" 3233 9010 14900 43280 2.520
NC300AR0 29.9998" 30.7503" 0.3750" 3561 10160 17960 51850 3.020

Hot Recommend