SG Series Type A Thin Section Bearings

Thin Section Bearings
A deep groove bearing with reduced shoulder on one side of inner or outer race ball path. Snapover assembly permits use of a one-piece circular pocket ring separator and greater ball complement. These bearings will accept radial load and single direction thrust load and are normally used in conjunction with another bearing of similar construction. Type A bearings require the application of thrust to establish contact angle.

Product Number Bore Dia (d) Outer Dia (D) Width (B) Dynamic (lbs) Static (lbs) Weight (lbs)
Thrust Radial Thrust
SG040AR0 4.000" 6.000" 1″ 3.610
SG042AR0 4.250" 6.250" 1″ 3.830
SG045AR0 4.500" 6.500" 1″ 3.950
SG047AR0 4.750" 6.750" 1″ 4.170
SG050AR0 5.000" 7.000" 1″ 4.420
SG055AR0 5.500" 7.500" 1″ 4.730
SG060AR0 6.000" 8.000" 1″ 5.070
SG065AR0 6.500" 8.500" 1″ 5.410
SG070AR0 7.000" 9.000" 1″ 5.870
SG075AR0 7.500" 9.500" 1″ 6.200
SG080AR0 8.000" 10.000" 1″ 6.540
SG090AR0 9.000" 11.000" 1″ 7.220
SG100AR0 10.000" 12.000" 1″ 8.000
SG110AR0 11.000" 13.000" 1″ 8.680
SG120AR0 12.000" 14.000" 1″ 9.470
SG140AR0 14.000" 16.000" 1″ 10.900
SG160AR0 16.000" 18.000" 1″ 12.400
SG180AR0 18.000" 20.000" 1″ 13.800
SG200AR0 20.000" 22.000" 1″ 15.200
SG220AR0 22.000" 24.000" 1″ 16.630
SG250AR0 25.000" 27.000" 1″ 18.800

Hot Recommend

Navigation