SF Series Type A Thin Section Bearings

Thin Section Bearings
A deep groove bearing with reduced shoulder on one side of inner or outer race ball path. Snapover assembly permits use of a one-piece circular pocket ring separator and greater ball complement. These bearings will accept radial load and single direction thrust load and are normally used in conjunction with another bearing of similar construction. Type A bearings require the application of thrust to establish contact angle.

Product Number Bore Dia (d) Outer Dia (D) Width (B) Dynamic (lbs) Static (lbs) Weight (lbs)
Thrust Radial Thrust
SF040AR0 4.000" 5.500" 0.7500" 1.920
SF042AR0 4.250" 5.750" 0.7500" 2.040
SF045AR0 4.500" 6.000" 0.7500" 2.140
SF047AR0 4.750" 6.250" 0.7500" 2.260
SF050AR0 5.000" 6.500" 0.7500" 2.370
SF055AR0 5.500" 7.000" 0.7500" 2.590
SF060AR0 6.000" 7.500" 0.7500" 2.720
SF065AR0 6.500" 8.000" 0.7500" 2.940
SF070AR0 7.000" 8.500" 0.7500" 3.160
SF075AR0 7.500" 9.000" 0.7500" 3.390
SF080AR0 8.000" 9.500" 0.7500" 3.610
SF090AR0 9.000" 10.500" 0.7500" 3.950
SF100AR0 10.000" 11.500" 0.7500" 4.400
SF110AR0 11.000" 12.500" 0.7500" 4.750
SF120AR0 12.000" 13.500" 0.7500" 5.200
SF140AR0 14.000" 15.500" 0.7500" 5.760
SF160AR0 16.000" 17.500" 0.7500" 6.780
SF180AR0 18.000" 19.500" 0.7500" 7.670
SF200AR0 20.000" 21.500" 0.7500" 8.470
SF250AR0 25.000" 26.500" 0.7500" 10.500

Hot Recommend

Navigation