SD Series Type A Thin Section Bearings

Thin Section Bearings
A deep groove bearing with reduced shoulder on one side of inner or outer race ball path. Snapover assembly permits use of a one-piece circular pocket ring separator and greater ball complement. These bearings will accept radial load and single direction thrust load and are normally used in conjunction with another bearing of similar construction. Type A bearings require the application of thrust to establish contact angle.

Product Number Bore Dia (d) Outer Dia (D) Width (B) Dynamic (lbs) Static (lbs) Weight (lbs)
Thrust Radial Thrust
SD040AR0 4.000" 5.000" 0.5000" 0.800
SD042AR0 4.250" 5.250" 0.5000" 0.840
SD045AR0 4.500" 5.500" 0.5000" 0.880
SD047AR0 4.750" 5.750" 0.5000" 0.930
SD050AR0 5.000" 6.000" 0.5000" 0.980
SD055AR0 5.500" 6.500" 0.5000" 1.060
SD060AR0 6.000" 7.000" 0.5000" 1.150
SD065AR0 6.500" 7.500" 0.5000" 1.240
SD070AR0 7.000" 8.000" 0.5000" 1.330
SD075AR0 7.500" 8.500" 0.5000" 1.420
SD080AR0 8.000" 9.000" 0.5000" 1.520
SD090AR0 9.000" 10.000" 0.5000" 1.690
SD100AR0 10.000" 11.000" 0.5000" 1.870
SD110AR0 11.000" 12.000" 0.5000" 2.050
SD120AR0 12.000" 13.000" 0.5000" 2.230
SD140AR0 14.000" 15.000" 0.5000" 2.570
SD160AR0 16.000" 17.000" 0.5000" 2.930
SD180AR0 18.000" 19.000" 0.5000" 3.290
SD200AR0 20.000" 21.000" 0.5000" 3.650
SD210AR0 21.000" 22.000" 0.5000" 3.830
SD250AR0 25.000" 26.000" 0.5000" 4.540

Hot Recommend

Navigation