SC Series Type A Thin Section Bearings

Thin Section Bearings
A deep groove bearing with reduced shoulder on one side of inner or outer race ball path. Snapover assembly permits use of a one-piece circular pocket ring separator and greater ball complement. These bearings will accept radial load and single direction thrust load and are normally used in conjunction with another bearing of similar construction. Type A bearings require the application of thrust to establish contact angle.

Product Number Bore Dia (d) Outer Dia (D) Width (B) Dynamic (lbs) Static (lbs) Weight (lbs)
Thrust Radial Thrust
SC040AR0 4.000" 4.750" 0.3750" 0.440
SC042AR0 4.250" 5.000" 0.3750" 0.460
SC045AR0 4.500" 5.250" 0.3750" 0.490
SC047AR0 4.750" 5.500" 0.3750" 0.510
SC050AR0 5.000" 5.750" 0.3750" 0.540
SC055AR0 5.500" 6.250" 0.3750" 0.580
SC060AR0 6.000" 6.750" 0.3750" 0.640
SC065AR0 6.500" 7.250" 0.3750" 0.680
SC070AR0 7.000" 7.750" 0.3750" 0.740
SC075AR0 7.500" 8.250" 0.3750" 0.780
SC080AR0 8.000" 8.750" 0.3750" 0.840
SC090AR0 9.000" 9.750" 0.3750" 0.980
SC100AR0 10.000" 10.750" 0.3750" 1.040
SC110AR0 11.000" 11.750" 0.3750" 1.140
SC120AR0 12.000" 12.750" 0.3750" 1.230
SC140AR0 14.000" 14.750" 0.3750" 1.430
SC160AR0 16.000" 16.750" 0.3750" 1.630
SC180AR0 18.000" 18.750" 0.3750" 1.830
SC200AR0 20.000" 20.750" 0.3750" 2.030
SC250AR0 25.000" 25.750" 0.3750" 2.520

Hot Recommend

Navigation