SB Series Type A Thin Section Bearings

Thin Section Bearings
A deep groove bearing with reduced shoulder on one side of inner or outer race ball path. Snapover assembly permits use of a one-piece circular pocket ring separator and greater ball complement. These bearings will accept radial load and single direction thrust load and are normally used in conjunction with another bearing of similar construction. Type A bearings require the application of thrust to establish contact angle.

Product Number Bore Dia (d) Outer Dia (D) Width (B) Dynamic (lbs) Static (lbs) Weight (lbs)
Thrust Radial Thrust
SB020AR0 2.000" 2.625" 0.3125" 0.150
SB025AR0 2.500" 3.125" 0.3125" 0.190
SB030AR0 3.000" 3.625" 0.3125" 0.220
SB035AR0 3.500" 4.125" 0.3125" 0.270
SB040AR0 4.000" 4.625" 0.3125" 0.300
SB042AR0 4.250" 4.875" 0.3125" 0.310
SB045AR0 4.500" 5.125" 0.3125" 0.340
SB047AR0 4.750" 5.375" 0.3125" 0.350
SB050AR0 5.000" 5.625" 0.3125" 0.370
SB055AR0 5.500" 6.125" 0.3125" 0.400
SB060AR0 6.000" 6.625" 0.3125" 0.440
SB065AR0 6.500" 7.125" 0.3125" 0.470
SB070AR0 7.000" 7.625" 0.3125" 0.500
SB075AR0 7.500" 8.125" 0.3125" 0.540
SB080AR0 8.000" 8.625" 0.3125" 0.570
SB090AR0 9.000" 9.625" 0.3125" 0.640
SB100AR0 10.000" 10.625" 0.3125" 0.710
SB110AR0 11.000" 11.625" 0.3125" 0.780
SB120AR0 12.000" 12.625" 0.3125" 0.850
SB140AR0 14.000" 14.625" 0.3125" 0.980
SB160AR0 16.000" 16.625" 0.3125" 1.120
SB180AR0 18.000" 18.625" 0.3125" 1.260
SB200AR0 20.000" 20.625" 0.3125" 1.400

Hot Recommend

Navigation