SCE24-TN

Drawn cup needle roller bearings with open ends SCE24-TN


 
Fw 1/8  inch  
Fw 3,175 mm  
D 0,25 inch
D 6,35 mm  
C 0,25 inch
C 6,35 mm  
 
m 0,003 lbs Mass
m 1 g Mass
Cr 240 lbf Basic dynamic load rating, radial
Cr 1070  N Basic dynamic load rating, radial
C0r 165 lbf Basic static load rating, radial
C0r 740  N Basic static load rating, radial
nG 31500  1/min Reference speed




SCE24-TN are constructional units consisting of thin-walled outer rings formed without cutting, and needle roller and cage assemblies. Drawn cup needle roller bearings with open ends are also available in full complement needle roller sets. 

These SCE24-TN needle roller bearing have an extremely low radial sectional height with very high load carrying capacity and are very economical relative to their size.
These bearings are supplied with single seal or double seals. Lip of the seals protect from contamination under normal operating condition.




Hot Recommendation
RNA2208-2RSR Yoke Type Track Rollers
Category:Yoke Type Track Rollers RNA22..-2RSR
Size:48x80x22.7mm
RNA4908 Bearings
Category:Needle Roller Bearings RNA49
Size:48x62x22mm
NA6914-ZW Bearings
Category:Needle Roller Bearings NA69
Size:70x100x54mm
GS81103 Housing Locating Washers
Category:Housing Locating Washers GS811
Size:18x30x2.75mm
PWTR3072-2RS Yoke Type Track Rollers
Category:Yoke Type Track Rollers PWTR..-2RS
Size:30x72x29mm
BCE1211-P
Category:BCE-P Drawn Cup Needle Roller Bearings
Size:19.05x25.4x12.7mm
NUTR3580 Yoke Type Track Rollers
Category:Yoke Type Track Rollers NUTR
Size:35x80x29mm
IR75X85X30 Inner Rings
Category:Inner Rings IR
Size:75X85X30mm
K22X28X17 Needle Roller And Cage Assemblies
Category:Needle Roller And Cage Assemblies K
Size:22X28X17mm
C222820 Needle Roller And Cage Assemblies
Category:Needle Roller And Cage Assemblies C
Size:34.925x44.45x31.75mm


Request a Quote

* fields are required.