TOLERANCE CLASS ABEC-1
INNER RING	Tolerance in um

d		^dmp		Vdp2)			Vdmp	Kia	^Bs		VBs
				Diameter Series
mm				9	0,1	2,3,4
over	incl.	high	low	max.			max.	max.	high	low	max.
1)0.6	2.5	0	-8	10	8	6	6	10	0	-40	12
2.5	10	0	-8	10	8	6	6	10	0	-120	15
10	18	0	-8	10	8	6	6	10	0	-120	20
18	30	0	-10	13	10	8	8	13	0	-120	20
30	50	0	-12	15	12	9	9	15	0	-120	20
50	80	0	-15	19	19	11	11	20	0	-150	25

1)0.6 is included.

2)No value for diameter series 7,8.

OUTER RING	Tolerance in um

D		^Dmp		VDp2)4)				VDmp4)	Kea	^Cs		VCs
				Open Bearings			Capped Bearings2)3)
mm
				Diameter Series
				9	0,1	2,3,4	2,3,4
over	incl.	high	low	max.				max.	max.	high	low	max.
1)2.5	6	0	-8	10	8	6	10	6	15	Identical to ^Bs and VBs of inner ring of same bearing
6	18	0	-8	10	8	6	10	6	15
18	30	0	-9	12	9	7	12	7	15
30	50	0	-11	14	11	8	16	8	20
50	80	0	-13	16	13	10	20	10	25
80	120	0	-15	19	19	11	26	11	35
120	150	0	-18	23	23	14	30	14	40

1)2.5 is included.

3)No values for diameter seriers9,0,1.

2)No values for diameter series 7,8.

4)Fit for before assembling and after disestablish of snap rings.

ABEC STANDARD BEARING TOLERANCES FOR INCH-DIMENSION BALL BEARINGS (See corresponding metric grouping)

Inch		MM
Over	Incl.	Over	Incl.
0.0984	0.2362	2.5	6
0.2362	0.3937	6	10
0.3937	0.7087	10	18
0.7087	1.1811	18	30
1.1811	1.9685	30	50
1.9685	3.1496	50	80
3.1496	4.7244	80	120