Looking For Bearings?
All Types Of High Quality Bearings. Extensive Inventory, Fast Shipping.Find Exactly What You Want Today!
bearings
Bearing Manufacturer  Products  Bearing Types  Bearing News  

Revolvo Won an Order to Supply Two Large Split Roller Bearings

By Bearing Manufacturer>Bearing News>Revolvo Won an Order to Supply Two Large Split Roller Bearings
©2004-2012

Revolvo has won an order from a cement plant in Thailand to supply two large split roller bearings worth a total of GBP 40,000 One is a standard 850mm bore unit and the second is a special 849mm bore bearing designed to cope with an undersized shaft.

Revolvo won the order because of its willingness to manufacture the special size bearing and for the overall design of its SRB unit, with a brass instead of aluminium cage, which was considered more durable.

The SRB bearings are being used in a ball mill to crush limestone, with the rock actually being fed through the bore of the bearings.

The two SRB are replacement units for aluminium-caged split roller bearings which have been failing for some time.

The problem with replacing these units has been an undersized shaft.

Both bearing shafts should be 850mm but, due to wear and tear, one shaft is 849mm.

This meant that the user either had to replace the shaft completely, a mammoth and costly undertaking, or find a supplier who would manufacture a special replacement bearing.

In addition to its standard sizes, Revolvo manufactures larger, noncatalogue bearings in sizes up to 1500mm.

These "special" bearings are used in process and extraction industries worldwide.

Revolvo is able to produce these bearings due its turning capacity up to 1.8m and its new grinding capability to 1.5m.

In common with all Revolvo's SRB bearings the Thailand units are being supplied with machined brass cages.

Revolvo's cage design has CNC bored pockets that are optimised to give very accurate roller guidance, which prevents skewing, a condition that can lead to edge loading on the bearing and reduced bearing life.

In addition to providing excellent roller guidance, the Brass cage also allows operation at temperatures of up to 140C without problems and operating speeds up to 25% higher, as long as thrust loads are within design limits.

Brass cages absorb lubricants and perform well in aggressive environments where lubrication is marginal.

The ability of SRB split roller bearings to perform reliably in aggressive cement applications is enhanced by the performance of the sealing systems available to protect the cartridge bearing units.

Revolvo has developed a special labyrinth seal to exclude the fine, abrasive and hygroscopic cement dust, which creates problems for equipment such as screw conveyors in cement plants.


F T 
Latest Articles
Abec 5 Skateboard Bearings, Abec-5
Bearings Ceramic
Sealmaster bearing
Bower cylindrical bearing
Abec Bearing 608z, Skateboard Bearings
Small Bearing Suppliers
5/32 inner diameter = 0.156 inch
Small Parts And Bearings
Stainless Steel Skateboard Bearing,
Skateboard Bearing Spacer, Washer
Latest Topic
MR105zz Bearings
6804 2rs Bearings
K35X42X20 Needle Roller And Cage
696 Silicon Carbide Ceramic Hybrid
6916 2rs Bearings
PNA25/47 Aligning Needle Roller Bearings
R515zz
51124M Silicon Carbide Full Ceramic
694 2RS Bearings
601x Bearings
Category

Miniature Bearings
Deep Groove Ball Bearings
Flanged Ball Bearings
Miniature Thrust Bearings
Needle Roller Bearings
Stainless Steel Bearings
Ceramic Bearings
Skateboard Bearings
Dental Bearings
Custom Bearings


Latest Bearings


$index_product_mb$